Start by using your shovel to dig around the steel fence posts and the concrete. This will make it easier for you to remove them later. Dig all the way down to the bottom of the concrete. Wear gloves for digging and then try moving the steel fence posts backward and forward to loosen them a little.Click to see full answer. Similarly, it is asked, how do you remove a chain link fence post from concrete? Getting it Out of the Ground Clip the metal rings or strips holding the chain link to the posts and roll up the fencing. Lift off the top rail and caps. Dig down along the side of the concrete until you get to the bottom of the post and concrete. Wiggle the post back and forth.Secondly, how do you remove a fence post from the ground? Step #1 – Dig around the post until 3-4″ of the concrete footing are exposed. Step #2 – Wrap a chain around the concrete footing of the fence post. Step #3 – Connect the chain to the High-Lift Jack. Step #4 – Crank the lever on the high-lift jack to lift the concrete out of the ground. In this manner, how deep should metal fence posts be buried? The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.How do you pull T posts? Begin by rocking the post back and forth to loosen the soil around it. Option 1 Position a fence post puller next to the T-post to be removed. With the post puller arm end up, latch the puller’s hook beneath one of the nodules on the T-post. Push the puller arm down slowly and allow the leverage action to do the work.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZqmepZ%2Brsm6tjKacrZmcYrOmusKeZKmno6l6p77OpmScp56Yv6bAxGg%3D